Tuesday, August 30, 2011

ART TUBE-MP Microphone Preamps

ART TUBE-MP Microphone Preamps Review



ART TUBE-MP Microphone Preamps Feature

  • Art Tube Mic Preamp
The Tube MP is the worlds most popular external tube microphone preamp. Whether youre working with a four-track, hard-disk, or digital multitrack recorder, the Tube MPs TEC award nominated design will allow you to obtain professional recording studio results at a fraction of the cost of comparable equipment. The hybrid design of the Tube MP allows it to add warmth and fatness to a signal while maintaining exceptionally low-noise and high quality. While its primary application is to be used with a microphone, the Tube MP is an exceptional direct box - impedance matching, amplifying and improving the sound of any instrument plugged into it.


Monday, August 29, 2011

Uhf / Vhf Antenna Pre Amp Kit

Uhf / Vhf Antenna Pre Amp Kit Review



Uhf / Vhf Antenna Pre Amp Kit Feature

  • The PA-18 is a low noise, mast mounted pre-amp sys
  • Video-antennas
  • Multi Directional HDTV Antenna
Antennas Direct PA18 Antenna Kit PA-18 675


Sunday, August 28, 2011

Audix MG18 Miniature gooseneck condenser microphones - RF Immunity

Audix MG18 Miniature gooseneck condenser microphones - RF Immunity Review



Audix MG18 Miniature gooseneck condenser microphones - RF Immunity Feature

  • dual preamp circuitry
  • uniformly controlled cardioid polar pattern
  • immunity from RF interference
  • flexible metal gooseneck
  • field replaceable capsule
The MG12, MG15, and MG18 are professional miniature gooseneck condenser microphones designed for applications such as podium, presentation, meetings and teleconferencing. Known for their clarity, excellent sound quality and ease of operation, the MG12/15/18 have the ability to accurately capture and reproduce vocals from a comfortable distance. The MG12/15/18 are characterized with a uniformly controlled cardioid polar pattern, helping to isolate the speaker from other ambient noise in the room or on the stage. The MG12/15/18 gooseneck mics are also available in a hypercardioid polar pattern for tighter pattern control (see models below). With a wide frequency range of 60 Hz - 19 kHz, the MG12/15/18 provide natural sound with exceptional transient response. The MG12/15/18 gooseneck system is equipped with a sophisticated dual preamp circuitry - one circuit located in the capsule housing and the other circuit built into the base of the XLR. This circuitry is internally balanced, insuring that the audio path will be isolated from hum and noise. In addition, the circuitry employs protection from RF and spurious emissions from cell phones and wireless GSM devices. The goosenecks may be mounted with the supplied flange mount (TM1218) or with an optional base with an internal shockmount (SMT1218R). The mics may also be used on a standard mic stand or in conjunction with the Audix ATS-10 table stand with lighted on-off switch. Manufactured with very high standards and tight tolerances, the MG12/15/18 features a machined brass body, field replaceable capsule, replaceable electronics, and a variety of optional accessories. The MG12/15/18 operate on phantom power of 18 - 52 Volts and are available in non-reflective black matte finish.


Saturday, August 27, 2011

Brand New Kenwood Kdc-448u in Dash Car Cd/usb Receiver with Multicolor LCD Display + Remote Control

Brand New Kenwood Kdc-448u in Dash Car Cd/usb Receiver with Multicolor LCD Display + Remote Control Review



Brand New Kenwood Kdc-448u in Dash Car Cd/usb Receiver with Multicolor LCD Display + Remote Control Feature

  • CD receiver with AM/FM tuner
  • Plays CDs, CD-Rs, and CD-RW discs including discs loaded with MP3, WMA, and AAC music files
  • System Q Sound Control (6 EQ curves and a 3-band equalizer) Supreme Setting function restores high frequencies in music files
  • Compatible with satellite radio, HD Radio tuner, Bluetooth adapter
  • Outputs: 6-channel preamp outputs (front, rear, subwoofer)
Brand New Kenwood KDC-448U In Dash Car CD/USB Receiver With Multicolor LCD Display + Remote Control Features: General Features: CD receiver with AM/FM tuner Built-in MOSFET amplifier Plays CDs, CD-Rs, and CD-RW discs including discs loaded with MP3, WMA, and AAC music files Detachable face with 3-line display and variable color illumination Front USB port provides direct control of iPod and iPhone Remote control Audio Features: System Q Sound Control (6 EQ curves and a 3-band equalizer) Supreme Setting function restores high frequencies in music files High- and low-pass filters for speaker and preamp outputs Subwoofer level controls Expandability: Built-in iPod controls Compatible with satellite radio, HD Radio tuner, Bluetooth adapter Inputs: front panel auxiliary and USB inputs Outputs: 6-channel preamp outputs (front, rear, subwoofer)


Friday, August 26, 2011

Terk Technology TV-55 UHF/VHF HDTV Indoor/Outdoor Amplified Antenna

Terk Technology TV-55 UHF/VHF HDTV Indoor/Outdoor Amplified Antenna Review



Terk Technology TV-55 UHF/VHF HDTV Indoor/Outdoor Amplified Antenna Feature

  • Indoor/Outdoor Mounting Flexibility
  • Impedance-Matched Amplifier Precisely Calibrated for the Requirements of HDTV
  • Optimized for HDTV Reception
  • Reliable Transmission of High Definition Signals
The Terk TV-55 is engineered specifically to optimize the performance of high definition television as well as analog television signals. The TV-55’s unique helical coil element allows for an unobtrusive design yet without compromising the ability to capture lower-frequency TV stations. The helical coil receives both UHF and VHF frequencies and provides exceptional reception at all frequencies.


Thursday, August 25, 2011

Luna Guitars Aurora 3/4 Childrens Guitar/Dayglow Stickers/Gigbag Purpl

Luna Guitars Aurora 3/4 Childrens Guitar/Dayglow Stickers/Gigbag Purpl Review



Luna Guitars Aurora 3/4 Childrens Guitar/Dayglow Stickers/Gigbag Purpl Feature

  • Comes with stickers for both boys & girls
  • Body: 3/4 dread mini
  • Top: basswood
  • Back/Sides: basswood
  • Preamp/Tuner: No
Luna Guitars Aurora 3/4 Childrens Guitar/Dayglow Stickers/Gigbag Purpl.


Wednesday, August 24, 2011

M-Audio Audio Buddy Budget Microphone Preamp - Preamplifier

M-Audio Audio Buddy Budget Microphone Preamp - Preamplifier Review



M-Audio Audio Buddy Budget Microphone Preamp - Preamplifier Feature

  • Ultra-quiet 2-channel preampEach channel offers individually adjustable gainBalanced XLR with phantom power or a 1/4" instrument level inputIndependent 1/4" outputs (unbalanced or balanced TRS)Direct box functionality
M-Audio Audio Buddy Microphone PreAmp


Tuesday, August 23, 2011

Parasound - Classic 2100 Stereo Preamp

Parasound - Classic 2100 Stereo Preamp Review



Parasound - Classic 2100 Stereo Preamp Feature

  • Two channel high end audio preamplifier
  • 7 pairs of line level inputs
  • 1 input pair can be switched for MM or MC phono cartridge with correct input impedance
  • Can add to an existing surround system to upgrade analog two-channel sound
  • Parasound 3 year parts, 3 years labor warranty
Parasound's NewClassic Model 2100 is a versatile two-channel preamplifier that's equally expert with venerable and modern technology, from vinyl to MP3. A low-noise phono input provides the correct gain and load for both MM and MC cartridges. The Model 2100 also enables you to upgrade your present surround sound system for serious two-channel, audiophile-quality listening. Left, right, and sub bypass jacks make it simple to use the Model 2100 and your surround sound receiver in the same system, even if your system has a subwoofer and small left and right speakers. This great feature lets you keep the 2100 directly in the signal chain and play either stereo or surround sound without messing with wires. Automatic pass-through is activated as soon as you turn off the 2100. And bypass input can be selected via remote. Built-in subwoofer control is another key feature. Parasound really thought of it all with the Model 2100. An adjustable subwoofer crossover provides analog bass management for your stereo sources, and you can adjust the subwoofer level on the front panel. Also included are separate output jacks for full range (large speakers), and 80 Hz high pass filtered (small speakers). This lets you push only frequencies about 80 Hz to your satellite speakers, without needing an expensive external crossover.


Monday, August 22, 2011

Infinity Reference 1600a 600-Watt, High-Performance Mono Subwoofer Amplifier (Silver/Black)

Infinity Reference 1600a 600-Watt, High-Performance Mono Subwoofer Amplifier (Silver/Black) Review



Infinity Reference 1600a 600-Watt, High-Performance Mono Subwoofer Amplifier (Silver/Black) Feature

  • 600-Watt mono Class D subwoofer amplifier with on-board electronic crossover and variable bass boost circuit
  • 12dB per octave electronic crossover allows you to optimize bass performance based on enclosure type and subwoofer
  • Full-range preamp outputs facilitate use of multiple amplifiers without the need for adapters or signal splitters
  • One-year warranty
The Infinity 1600a is a 600-Watt mono subwoofer amplifier with on-board electronic crossover and variable bass boost circuit.

Infinity Reference Series Amplifiers

Looking for a more moving audio experience? Take Infinity car audio for a ride. Innovative materials and breakthrough engineering have always put Infinity products out in front of the competition. So expect extreme output from Reference Series amps, but be prepared for accuracy and detail that may surprise you. There is no better way to make your car audio system stand up and deliver than by powering your speakers and subs with Infinity electronics.



All the right features to get the job done. Click to enlarge.

Infinity 1600a Features

Class D Subwoofer Amps
Efficiency is the benefit of the Infinity Reference Series Class D subwoofer amplifiers. A higher percentage of the power the amp extracts from the car's charging system is converted into output to the speakers, and less is wasted as heat. That is really important if you're trying to provide power to a 1000-watt amplifier. Class D technology turns the analog input signal into a series of pulses that can be amplified more efficiently by transistors used as switches, rather than valves. They're either on and operating at their most efficient level, or they're off. The pulses are converted back into an analog signal by an output filter.

CEA-2006-Compliant
All Infinity amplifiers are tested in accordance with CEA-2006, which provides a testing procedure to help customers compare amplifiers accurately--apples to apples. Specs are based on industry-accepted standards, rather than on the whims of amplifier companies' marketing departments. Look for the CEA-2006 logo when comparing amplifiers, to be sure you're getting the power you're paying for.

Audiophile-Quality Full-Range Amplifiers
Class AB full-range amplifiers offer audiophile quality performance and the best compromise between efficiency, low distortion, maximum available headroom and output power.

Amps That Don't Break
Infinity amplifiers are tested according to the strictest and most demanding reliability-testing regimen ever designed for car audio amplifiers. They are shaken, baked, frozen, dropped and shocked--all while they're operating. When they've passed all these tests, they are tested again. The result is a series of amplifiers that just don't break.

DBO Bass-Optimization Circuit
provides superior control and adjustability, compared to traditional bass-boost. DBO is a 2nd order high-pass filter that can be adjusted between 20Hz and 80Hz. The boost (or Q) adjustment boosts the signal above the highpass filter frequency. Used with a sealed box, it can help to increase output for more "fun" if it's set to about 45Hz. If it's used with a vented box, it should be set at or slightly below the tuned frequency of the box. That will prevent woofer unloading, and provide more output at the frequency where the box is tuned and the woofer's excursion is minimized--where it can handle more power.

Onboard Electronic Crossovers
Reference Series amplifiers include 2nd order (12dB/octave) slopes and are continuously variable from 32Hz to 200Hz.

Variable Bass-Boost
Provides up to 12dB of boost at 50Hz in the Reference Series full-range amplifiers.

Direct-Connect Terminals
Eliminate the need for additional solder-on or crimp-on terminals and provide an easy and reliable connection for power, ground and speaker wires.

Full-Range Preamp Outputs
Eliminates the need for signal splitters.



Infinity 1600a Specifications

Power Output:400 watts RMS x 1 channel at 4 ohms and less than or equal to 1% THD + N
Signal-to-Noise Ratio:85dBA (reference 1 watt into 4 ohms)
Dynamic Power:600 watts at 2 ohms
Effective Damping Factor:6.3 at 4 ohms
Frequency Response (-3dB):11Hz to 330Hz (-3dB)
Maximum Input Signal:6V
Maximum Sensitivity:100mV
Dimensions (L x W x H):14-3/16 x 9 x 2-11/16 inches (360 x 229 x 68 mm)



About Infinity

Infinity was founded in 1968 on a unique blend of technology, performance, and design. Today, Infinity offers three tiers of automotive speakers comparable to the best home-audio components. Infinity Kappa Perfect, Kappa, and Reference Series speakers deliver performance that rivals the best the competition has to offer.


What's in the Box

Infinity Reference 1600a mono subwoofer amplifier (silver/black), mounting hardware, fuses, and user's manual.


Infinity Amplifier Options

Infinity has approached the amplifier category with the objective of delivering maximum CEA-rated power with all the right features to get the job done. Infinity's Reference amps simply deliver.

Infinity Reference 1300a Mono Subwoofer AmplifierInfinity Reference 1600a Mono Subwoofer AmplifierInfinity Reference 5350a 5-Channel AmplifierInfinity Reference 475a 4-Channel Full-Range Amplifier
  • The Reference 1600a features a 12dB per octave electronic crossover, allowing you to optimize bass performance based on enclosure type and subwoofer selection.
  • Full-range preamp outputs faciliate use of multiple amplifiers without the need for noisy and expensive adapters or signal splitters.
  • Port for future expansion products provided.
  • Power Output: 400 watts RMS x 1 channel at 4 ohms and ? 1% THD + N
  • Signal-to-Noise Ratio: 85dBA (reference 1 watt into 4 ohms)
  • Dynamic Power: 600 watts at 2 ohms
  • Effective Damping Factor: 6.3 at 4 ohms
  • Frequency Response (-3dB): 11Hz to 330Hz (-3dB)
  • Maximum Input Signal: 6V
  • Maximum Sensitivity: 100mV


  • Saturday, August 20, 2011

    Crunch PowerZone P900.4 450 Maxx Watt Power A/B Class Four-Channel Amplifier

    Crunch PowerZone P900.4 450 Maxx Watt Power A/B Class Four-Channel Amplifier Review



    Crunch PowerZone P900.4 450 Maxx Watt Power A/B Class Four-Channel Amplifier Feature

    • 4 x 115 W @ 4 Ohms, 4 x 225 W @ 2 Ohms, 2 x 450 W @ 4 Ohms Maxx Power
    • High-Pass Versa Cross X-Over Adjustment 60Hz to 1.2kHz, Low-Pass Versa Cross X-Over Adjustment 30Hz to 250Hz and Stereo / Mono Amplifier Mode Switch
    • Bridgeable Designs with Hi-Level Speaker Lead Inputs for Receiver such as OEM Radios Lacking Preamp Outputs, Amps Configure to 3-Channel Right and Left and Sub Mode, Daisy-Chain Line Outputs and Oversized Speaker Terminals
    • Rugged MOSFET Pulse Width Modulation Power Supply for Instant Maxx Power Output
    • Amp Protection with System Diagnostics LED?s Protect Against Current / Amperage Overload, Short Circuits, Thermal Overload, DC Offset
    Product Description: 4 x 115 W @ 4 Ohms, 4 x 225 W @ 2 Ohms, 2 x 450 W @ 4 Ohms Maxx Power The Crunch brand represents a wide array of "best-in-class" amplifiers for today's car audio market. PowerZone amplifiers feature everything you’d expect from Crunch with high power, lots of features and significant value. Considered the "best bump for the buck," Crunch amplifiers and subwoofers employ the latest designs and technology, based on shared engineering experience and expertise throughout the complete Maxxsonics brands. With a reputation for unique design, sonic accuracy and big power, Crunch amplifiers come in a variety of configurations. Whether it‘s the PCB or MOSFET power supply, Crunch amplifier components are engineered for high performance, quality, reliability – and good looks. Crunch subwoofers deliver groundpounding performance worthy of any size Crunch power amplifier. Attractive, affordable and innovative, look to Crunch design and engineering to continue leading the car audio industry in performance and value. Parent company, Maxxsonics USA, offers decades of combined experience and distinction with four brands MB QUART, Hifonics, Autotek and Crunch. We independently support and maintain these best-in-class brands to bring you some of the biggest, baddest and coolest products in the car, marine and home audio industry. Maxxsonics designers and engineers take great care and satisfaction in producing only the finest quality products to exceed your needs. Look for the stylized blue "M" on your product and packaging. It stands for quality, performance and power you can only get from Maxxsonics.


    Friday, August 19, 2011

    TASCAM DP-008 8-Track Digital Portastudio

    TASCAM DP-008 8-Track Digital Portastudio Review



    TASCAM DP-008 8-Track Digital Portastudio Feature

    • 8-track digital Portastudio with 2-track simultaneous recording capabilities
    • Records to SD/SDHC memory cards up to 32 GB in size; comes with 2 GB SD card
    • Each track has its own row of knobs for level, pan and effects
    • Built-in metronome and chromatic tuner for tight-sounding tracks
    • Powered by four AA batteries or optional power supply
    Concentrate on your music and not on the recording process with the easy-to-use Tascam DP-008 8-track digital Portastudio, which can capture CD-quality audio wherever you roam. Using a Secure Digital (SD) memory card, you can record two tracks simultaneously and work with up to eight tracks in a multi-track project.



    The easily portable Tascam DP-008 eight-track recorder (see larger image).


    Side view of the Tascam DP-008 (see larger image).
    You can use built-in microphones to grab ideas, plug condenser mics into the XLR inputs or plug a guitar directly in to lay tracks. There's even a metronome and chromatic tuner built-in for tight-sounding tracks. The DP-008 also allows you to digitally bounce tracks to make room for more, and touches like editing and undo make recording stress-free.

    Each track on the DP-008 has its own row of knobs for level, pan and effects, just like Tascam's classic cassette Portastudios of the past. The effects knob sends to a built-in stereo reverb processor with hall, room, stage and other effects. Each track also has EQ to tailor the sound for your mix. When your song is complete, mix it to a dedicated stereo track while riding levels and flipping pan as much as you want. You can export your mix, or even individual tracks, as a WAV file.

    What's in the Box
    Tascam DP-008, USB cable, 2 GB SD card, batteries, user manual

    Features and Specifications

    • 8-track Digital Portastudio
    • 2-track simultaneous recording
    • (2) XLR microphone inputs with phantom power
    • (2) 1/4-inch line inputs, one switchable to guitar level for direct recording
    • 1/4-inch footswitch input and Autopunch features for punch-in recording
    • RCA line outputs
    • 1/8-inch stereo headphone output
    • Chromatic tuner and metronome features
    • Stereo reverb effect on send/return path
    • Level, Pan and 2-band EQ controls per channel
    • 44.1kHz/16-bit recording resolution
    • Records to SD or SDHC Card media, up to 32 GB supported
    • USB 2.0 connection to computer for backup and track/mixdown export
    • Built-in stereo electret condenser microphones
    • Backlit LCD display
    • Powered by four AA batteries (included) or PS-P520 power supply (optional)
    • Up to 5.5 hours of battery life (recording, phantom power off); up to 6 hours of battery life for playback
    • Measures 8.7 x 1.42 x 4.98 inches and weighs 19.7 ounces (without batteries)


    Wednesday, August 17, 2011

    Behringer ECM8000 Condenser Microphone Omni

    Behringer ECM8000 Condenser Microphone Omni Review



    Behringer ECM8000 Condenser Microphone Omni Feature

    • Extremely linear frequency response from 15 Hz to 20 kHz
    • Electret condenser technology
    • Well-balanced, true omnidirectional characteristic
    • Optimally suited for acoustic measurement applications
    • Phantom powered, +15 V to +48 V
    To get the best sound in any room, you must first understand the room's acoustics. The ECM8000 is a specialized condenser microphone designed for use with real-time analyzers, such as our ULTRACURVE DEQ2496, to provide an accurate acoustic picture of the room. You can then use your graphic EQ to fine-tune your system's performance to perfectly match the characteristics of any acoustic environment.

    Great Sound From Every Angle
    The ECM8000's ruler-flat frequency response from 15 Hz to 20 kHz and omnidirectional polar pattern give you a clear, accurate reading of any room's unique sound characteristics. Like standard condenser mics used for recording or performance, the ECM8000 is phantom powered, from +15 V to +48 V. Berhinger even includes a rugged carrying case, microphone clip and stand adapter to ensure smooth operation every time.

    High-Quality Components
    With exceptionally rugged construction to ensure long life, the ECM8000 features an ultra-low noise transformerless FET input to eliminate low-frequency distortion. A gold-plated, 3-pin XLR output connector provides the perfect signal transmission.

    What's in the Box
    Behringer ECM8000 Measurement Condenser Microphone, Mic Clip, Stand Adapter, Carrying Case Omnidirectional Measurement Microphone


    Tuesday, August 16, 2011

    BOSS AUDIO 840UBI IN-DASH CD/MP3 RECEIVER WITH BLUETOOTH CONNECTIVITY

    BOSS AUDIO 840UBI IN-DASH CD/MP3 RECEIVER WITH BLUETOOTH CONNECTIVITY Review



    BOSS AUDIO 840UBI IN-DASH CD/MP3 RECEIVER WITH BLUETOOTH CONNECTIVITY Feature

    • BLUETOOTH ENABLED.
    • 80W X 4 CHANNELS OUTPUT POWER.
    • 5V PREAMP OUTPUT.
    • FRONT AUX INPUT.
    • DUAL (FRONT & REAR) RCA OUTPUTS.
    BLUETOOTH ENABLES; MP3 COMPATIBLE; IN-DASH CD RECEIVER WITH DETACHABLE FRONT PANEL; USB PORT; BUTTON-LESS TOUCH SENSTIVE PANEL


    Sunday, August 14, 2011

    New Ford Factory Amplifier Integration Harness Practical One 8 Pin Plug One 8 Pin Speaker Plug

    New Ford Factory Amplifier Integration Harness Practical One 8 Pin Plug One 8 Pin Speaker Plug Review



    New Ford Factory Amplifier Integration Harness Practical One 8 Pin Plug One 8 Pin Speaker Plug Feature

    • Metra 70-5510 Ford factory amplifier interface harness that is plugged in behind the radio an retains the factory amplifier.
    • His harness is set up for low level inputs only using the RCA outputs from the aftermarket radio.
    • FEATURES: Factory Amplifier Integration harness.
    • 4 RCA plugs to mate to aftermarket radio's pre-amp outputs.
    • One 8-pin plug and one 8-pin speaker plug.
    The design of this product is very exquisite and beautiful.