Sescom LN2MIC-ZMH4-MON 3.5mm Line to Mic 25dB Attenuation Cable for Zoom H4N with Headphone Monitoring Jack

Sescom LN2MIC-ZMH4-MON 3.5mm Line to Mic 25dB Attenuation Cable for Zoom H4N with Headphone Monitoring Jack Review

Sescom LN2MIC-ZMH4-MON 3.5mm Line to Mic 25dB Attenuation Cable for Zoom H4N with Headphone Monitoring Jack Feature

• Audio Input Level: -10dBV (0.25pp - 0.47pp) Prosumer Line Level
• Input Impedance: 1.5K ohms
• Audio Output Level: Approx. 14mV
• Output Impedance: 92 ohms

The Sescom LN2MIC-ZMH4-MON cable is designed for portable digital audio recorders and mic preamps with a single output jack. This jack is typically used for headphone monitoring or connecting to a DSLR audio input for recording. The LN2MIC-ZMH4-MON Y-Splitter cable allows you to do both monitoring and recording from a single output jack. It also features a -25dB L Pad attenuator on both audio channels to reduce the Prosumer Line Level output (-10dBV) to your camera's mic input sweet spot level. It's the perfect mating cable for Zoom H4N recorders when connecting to Canon D5 MkII but also works great for other similar mic preamps and DSLR cameras that require 25db of attenuation. The cable is designed with the proper impedances to assure maximum voltage transfer and low noise operation. The cable shield is isolated on the camera end to prevent shield noise from directly coupling into the camera connector ground. The cable allows users to go directly from the audio recorder into the camera and also monitor with headphones, creating a compact and elegant interface solution. All resistors values are 1% metal film to assure similar voltage attenuation between the stereo inputs. Cable ends are labeled for proper connection.

FiiO E1 Portable Headphone Amplifier, Sound Booster With Volume Control - For Apple iPod, Nano, Classic, Video, iTouch And iPhone 3G/4

FiiO E1 Portable Headphone Amplifier, Sound Booster With Volume Control - For Apple iPod, Nano, Classic, Video, iTouch And iPhone 3G/4 Review

FiiO E1 Portable Headphone Amplifier, Sound Booster With Volume Control - For Apple iPod, Nano, Classic, Video, iTouch And iPhone 3G/4 Feature

• Designed for iPod-iPhone, (Not For iPod Shuffle), Improves the sound quality with the line out from the dock
• Built in high quality Texas Instruments's headphone amplifier Integrated Circuit
• High power output to drive high impedance or low sensitivity headphones or earphones
• Easy control of the playback of the iPod/iPhone while the player stays securely in your pocket
• Powered by the iPod/iPhone, built-in clip, you can clip it onto anything,plug and play

The FiiO E1 Portable Headphone Amplifier for iPod / iPhone specifically designed for use with Apple's iPod and iPhone. It is the first headphone amplifier in the world with in-line remote control functions. The FiiO E1 has a built in high quality headphone amplifier IC manufactured by Texas Instruments. The FiiO E1 uses the line out signal from the iPod / iPhone, so it provides better sound quality, and is able to drive high impedance or low sensitivity headphones! With the in-line control function, you can easily control the playback of the iPod / iPhone from the E1 Amplifier! The FiiO E1 will bring you better sound quality and a more convenient playback experience! Output power: 100 mW (16 ohms Loaded), 12 mW (300 ohms Loaded) * Signal to Noise Ratio: â?¥98 dB * Distortion: < 0.009% (10 mW) * Frequency Response: 10 Hz - 80 KHz * Suitable Headphone Impedance: 16 ohms - 300 ohms * Power Supply: iPod/iPhone power 3.3V * Length: 800mm (Line Exposed) * Weight: 20g

FiiO E5 Headphone Amplifier

FiiO E5 Headphone Amplifier Review

FiiO E5 Headphone Amplifier Feature

• For high impedance or low sensitivity Hi-fi headphones
• Metal case and built-in metal clip
• Individual power switch and Electronic volume control
• USB charger port and 200mAh rechargerable battery
• Dimension 44.2mm x 38 mm x 12.6 mm

FiiO E5 is a Portable Headphone Amplifier designed to improve the sound quality and volume of any portable audio source such as MP3 players, iPods, personal media players, mobile phones, laptops, notebooks/netbooks, or portable CD players. The E5 retains all of the advantages of the popular E3 while adding many new features and a substantial boost in performance, all inside a very small and slim aluminum case. With built-in volume controls, the E5 can be used with the line-level output of audio sources for even better sound quality. More than just a refresh, the E5 offers higher power output, better signal to noise ratio and lower distortion. Built on an entirely new amplifier platform, the E5 provides superior sound quality and works well with high impedance headphones. Two EQ profiles are available for flat or bass-boost response, allowing additional flexibility in obtaining optimal tonal match with different headphones. Highlight Features - Robust design handles high impedance and low sensitivity headphones - Easy to carry and use both indoors and outdoors - Increases your music player's battery life - New amplifier design with high S/N and low distortion - Very high PSRR for superior supply noise rejection - Metal case reduces interference when used with GSM mobile phones - Discreet power switch - Built-in electronic volume control for ultra low noise - Two EQ profiles: flat response and bass-boost modes - Built-in rechargeable battery provides up to 20 hours of normal use - Mini USB charger port can be used with any USB power source - Built-in metal clip conveniently attaches to clothing, bags, and etc Specifications - Output Power: 100mW (32ohms Load) 18mW (300ohms Load) - Signal to Noise Ratio: >=98dB (A Weight) - Power Supply: 200mAh rechargerable battery - Frequency Response: 10Hz - 60kHz - Distortion: <0.009% (10 mW) - Voltage: USB DC 5V

ART HeadTap Headphone Tap

ART HeadTap Headphone Tap Review

ART HeadTap Headphone Tap Feature

• Passive operationConnects to PA or monitor amplifierVolume control regulates headphone output Internal resistors protect the phonesProtects the amplifier low impedance loadsConnects to headphone amps to provide extra monitoring capability in studios

The ART HeadTap Headphone Tap is a passive device with an input to connect the PA or monitor amplifier and an output to connect your headphones. Sometimes floor monitors are a problem. There isn't enough room for them onstage or someone sits in and can't hear the monitors, or the drummer can't hear them well enough. Or perhaps it's a pickup gig or a rehearsal and you didn't have enough time to set them up. In any case, sometimes it's preferable to just to put on headphones and somehow connect them to the PA. That's where a headphone tap comes in. A volume control regulates the headphone output and internal resistors keep the unit's impedance high enough to protect the phones. It also protects the amplifier from encountering too low a load impedance while powering tap units, the speaker system, or several tap units by themselves. The HeadTAP will also work with a stereo headphone amplifier for use in recording situations when you want to add headphones for additional performers.

Pyle, 4-Channel Headphone Amplifier (Catalog Category: Musical Solutions / Amplifiers & PreAmps)

Pyle, 4-Channel Headphone Amplifier (Catalog Category: Musical Solutions / Amplifiers & PreAmps) Review

Pyle Pro Audio PHA80 4-Channel Headphone Amplifier

Four Channel Headphone Amp

Four Channel Headphone Amp Review

Four Channel Headphone Amp Feature

• 4-channel headphone amplifier
• Four 1/4" stereo headphone outputs
• Individual volume control for each headphone output
• Stereo 1/4" input
• 18 Volt AC adapter included

S amp provides an elegant solution for headphone monitoring, either on stage or in the studio. The S amp is a specially designed headphone amplifier that allows you to control the level balance between four sets of headphones. Providing unusually high power levels and superb audio fidelity, the S amp is compatible with virtually all popular headphone models. And just because this unit is miniature, don?t be surprised with its great sound and reliability, thanks to the use of high quality components and solid build construction.   ? Four channel stereo headphone amplifiers ? Maximum output power on each channel regardless of different headphone impedances ? Four 1/4-inch stereo headphone outputs ? Individual volume control for each headphone output ? Stereo 1/4 inch input connector ? Rugged aluminum extrusion chassis ? Large rubber bumper feet ? 18 Volt AC adapter included WARRANTY 3 years parts and labor.  

NuForce Icon Mobile headphone amplifier and USB DAC (black color)

NuForce Icon Mobile headphone amplifier and USB DAC (black color) Review

NuForce Icon Mobile headphone amplifier and USB DAC (black color) Feature

• Two headphone/line outputs: a 3.5mm 4-pin mini stereo (with mic) jack and a 3.5mm 3-pin mini stereo jack.
• A 3.5mm mini stereo external input.
• A Gain Select switch provides compatibility for a wide range of headphones and earphones.
• A high-quality rotary volume pot for maximizing USB and iPod signal-to-noise ratios.
• A built-in, rechargeable Lithium Ion battery with USB featuring a 2.5 hour charge-time for 13 hours of continuous playback at maximum power.

The Nuforce Icon Mobile, along with its accessories, allows the user to obtain better sound quality from mobile music players, smart phones and personal computers. The Icon Mobile also serves as a rechargeable, high-performance headphone amplifier with adjustable gain or stand-alone USB DAC with support for Skype, Messenger or similar microphones. Desktop Applications: 1. Connected to a computer via USB, the Icon Mobile can drive a pair of active, i.e., powered, speakers. 2. The external 3.5mm stereo input, when inserted, takes precedence over the USB DAC. This function allows the user to listen to music from sources such as an iPod without having to disconnect the Icon Mobile from the computer. Mobile Applications: 1. Due to cost constrains or power consumption considerations, mobile devices such as an iPod or smart phone do not incorporate high-performance headphone amplifiers. The Icon Mobile's optional iPod connector permits the user to bypass the iPod's volume control. The compact, lightweight Icon Mobile, which can drive a variety of headphones, connects to these devices via 3.5mm stereo input.